Holly Springs NC Heating & Air Conditioning Service

I performed routine maintenance on the heating system of a residential home. I checked the system for any issues and made the necessary adjustments to ensure it was running efficiently. I also cleaned the system and replaced the air filter.

I installed a 9k BTU Daikin Mini Split in a residential home.

I performed routine maintenance on a new unit, including cleaning, checking, and adjusting various components to ensure optimal performance.

I performed routine heating maintenance on a residential property. I checked the furnace, thermostat, and air filters and made any necessary adjustments. I also cleaned the vents and registers to improve airflow. The homeowner was very satisfied with the results.

I performed routine heating maintenance on a residential property. I checked the furnace, thermostat, and air filters and made any necessary adjustments. I also cleaned the vents and ducts to improve airflow. The homeowner was very satisfied with the results.

I recently completed a 2-unit heating maintenance job. The job involved inspecting and servicing the heating system, including checking the thermostat, air filters, and heating elements. I also replaced the air conditioner's condenser coil and cleaned the evaporator coil.

I replaced the downstairs unit with a 14.3 SEER2 2-ton Amana AC and furnace.

I recently completed a routine heating maintenance job for a client. This involved inspecting and cleaning the furnace, checking the thermostat, and replacing the air filter. I also made sure that all the vents were clear and unobstructed.

I recently completed a routine heating maintenance job for a client. This involved inspecting and cleaning the heating system, checking for any potential issues, and making necessary adjustments to ensure optimal performance. I also provided the client with tips on how to maintain the system and prevent future problems.

I replaced the defrost board in a residential HVAC system.

I recently completed a 2-unit heating maintenance job. I arrived at the property and performed a thorough inspection of the heating system, including checking the thermostat, air filters, and combustion analysis. I also cleaned the burners, inspected the heat exchanger, and tested the electrical connections. Finally, I provided the homeowner with a detailed report of my findings and recommendations for any necessary repairs or maintenance.

I performed routine maintenance on a heating system. I checked the system for any issues and made the necessary adjustments to ensure it was running efficiently. I also cleaned the system and replaced any worn-out parts.

I recently completed a job repairing a heating capacitor. The capacitor was not working properly, and I had to replace it with a new one. It was a simple process, but it required careful attention to detail to ensure that the new capacitor was installed correctly. I also checked the electrical connections and wiring to make sure that everything was working properly.

I replaced the blower motor in a customer's home that was out of warranty.

I was called to perform a routine maintenance check on a two-unit heating system. The system had been running smoothly, but I wanted to ensure that everything was operating correctly. I started by checking the thermostat settings and adjusting them as needed. I then ins

I was called to a home to fix a thermostat that wasn't responding. I arrived and found that the thermostat was not connected to the HVAC system. I checked the wiring and found that the thermostat was not receiving power. I replaced the thermostat and tested it to make sure it was working properly. The homeowner was very happy with the service and thanked me for my help.

I was called to a home to repair a heating unit. The unit was not heating properly, and the customer was concerned that it would not last the winter. I diagnosed the issue as a faulty thermostat and replaced it. The customer was happy with the service and thanked me for my help.

I provided an estimate to replace the ground floor unit.

I gave a quote for two new unit replacements.

I was called to a home to perform a heating maintenance check on a new unit. I arrived at the house and inspected the furnace, air conditioner, and heat pump. I checked the filters, inspected the burners, and tested the thermostat. I also checked the electrical connections and made sure the unit was operating properly. I made a few adjustments and recommendations to improve the unit's performance. The homeowner was very pleased with the service and thanked me for my help.

I upgraded the zone board and thermostat in a customer's home.

I performed routine heating maintenance on a new unit. I checked the unit's electrical connections, cleaned the air filters, and tested the thermostat. I also checked the unit's combustion safety and made sure the flue was clear.

I recently completed a routine 2 unit home heating maintenance. I inspected the system, cleaned the filters, and checked the thermostat. I also checked the electrical connections and made sure everything was working properly. I also provided the customer with a maintenance agreement and a list of recommended maintenance tasks for the future.

I installed a 2.5-ton Amana AC and furnace with a 14.3 SEER2 rating.

I provided a free estimate to replace an HVAC system for a customer.