Durham NC Heating & Air Conditioning Service

I was called to perform routine heating maintenance on a residential property. I arrived at the property and performed a thorough inspection of the heating system. I checked the thermostat, the furnace, the air filters, and the ducts. I also checked the gas line and the electrical connections.

I was called to a home to repair a leak in the ceiling of a bedroom. Upon arrival, I found that the drain line had become disconnected from the water heater, causing water to leak on the ceiling. I reinserted the pipe and fitting and verified that the system was operational.

I recently completed a routine heating maintenance job for a client. This involved inspecting and cleaning the heating system, checking for any potential issues, and making necessary adjustments to ensure optimal performance. I also provided the client with tips on how to maintain their heating system and prevent future problems.

I performed routine heating maintenance on a new unit.

I performed routine heating maintenance on a residential property. I checked the furnace, thermostat, and air filters, and made any necessary adjustments. I also cleaned the vents and registers to improve airflow.

I replaced a malfunctioning control board in a client's home. It was a complex process that required careful attention to detail and technical expertise. I worked closely with the client to diagnose the issue and select the appropriate replacement board. I then removed the old board and installed the new one, ensuring that all connections were secure and properly aligned. Finally, I tested the board to ensure it was functioning properly before completing the job.

I performed routine heating maintenance on a residential property. I checked the furnace, thermostat, and air filters, and made any necessary adjustments. I also cleaned the vents and registers to improve airflow.

I received a call from a customer who reported that their heating system was not working. Upon arrival, I found that the zone board was faulty. I replaced the faulty zone board and tested the system to ensure it was working properly. The customer was happy with the service and thanked me for my help.

I recently completed a unit heating maintenance job for a client. The job involved inspecting and servicing the heating system, including the furnace, air conditioner, and ductwork. I replaced the air filter, cleaned the coils, and checked the thermostat settings. I also performed a safety inspection to ensure the system was operating safely. The client was very pleased with the results and expressed satisfaction with the work I performed.

I replaced the defrost board in a residential HVAC system.

I am a maintenance technician at an HVAC company. I was recently assigned to perform maintenance on a new unit. I started by checking the unit's electrical connections and wiring. I then tested the unit's performance by running it through a series of tests. The unit passed all test and is in perfect working condition.

Arrived at a home for a scheduled air conditioning installation. We efficiently removed the old air conditioning unit and installed a new, energy-efficient model. We then carefully calibrated the system to ensure optimal performance and comfort. With the replacement complete, the home now has a reliable cooling system.

The air conditioning unit was malfunctioning due to a clogged condenser coil, which was causing it to overheat and shut down frequently. The coil was cleaned thoroughly, removing all debris and ensuring proper airflow. After the repair, the air conditioning unit is operated efficiently, providing consistent and cool air throughout the home.

Heating tune-up service call. Performed full furnace maintenance checklist on 4 year old Lennox system. Everything is working correctly and the unit is putting out good heat. Schedule air conditioning maintenance for closer to the summer.

Furnace maintenance service call. 8 year old trane system. Performed full heating maintenance checklist on the system; checked all connections, cleaned components, verified proper operation. Everything looks good at this time.

Heating repair service call. Fixed a furnace not turning on. Diagnosed and found a burned-out control board. Replaced it, and now everything is operational.

Furnace maintenance service call. Customer has a 3 year old Bryant system. Went through full heating tune-up checklist, checked all components for proper operation, cleaned up the system. Everything looks good.

Indoor air quality service call. Customer was having major issues with excess humidity in their home; installed whole home dehumidifier to help resolve problems. Walked customer through proper operation.

Arrived at a customer's home to provide a tune up on their air conditioning system. The outdoor system was thoroughly inspected for any wear and tear or issues with the components. The system and the surrounding area was cleaned and the air filters were replaced. There were no issues found with the system. The customer was happy to hear that their unit was running well.

Went out into the Triangle to install a new air conditioning system at a residential home. The old broken down system was removed and the new upgraded system was carefully installed. The new unit was then tested for performance. The system is running well and will be more energy efficient for the home. The customer was pleased with the service.

Installed a new air conditioning unit at a customer's home. The old outdated system was removed and the new unit was carefully put into place. The system was then tested to ensure all the components were working properly and that the unit was running well. The system will be more energy efficient for the home and lower utility bills. The customer was pleased with the service.

Provided annual maintenance on the air conditioning system of a residential customer. Upon arrival, I inspected the whole system for signs of wear and tear. I then replaced the system's filters and cleaned the condensate drain line. The tune up showed that there were no areas of concern with the unit and it is running well. The customer was pleased with the service.

Arrived at a residential home to install a new air conditioning unit. The customer's current unit was blowing warm air and it was time for a replacement. The old system was removed and the new system was carefully installed. Upon completion, the unit was ran to ensure proper performance. The unit is running as it should and will provide reliable cool air to the home.

Installed a new air conditioning system at a customer's home. The old corroded system was removed and the new unit was meticulously installed. Upon completion, the unit was inspected to ensure all the components were secure and that the system was running efficiently. This new air conditioner will be more reliable for the home. The customer was pleased with the replacement.

Went to a residential home to provide a tune up on a customer's air conditioning system. Upon my arrival, I thoroughly inspected the system for any issues with the components. I also tested the unit to ensure it was working properly. I replaced the filters, but otherwise there were no issues with the unit. The customer was pleased with the maintenance.